Skip to content

Federal rule changes

Federal rules, proposed rules and notices for water, wastewater, electric and natural gas utilities, newest first, from the Federal Register.

Results

Showing 1–20 of 405

Source: Federal Register. Checked .

  • Comment period open Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Amendments to Liquefied Natural Gas Facilities

    PHMSA proposes updating its regulations for liquefied natural gas (LNG) facilities to incorporate by reference the most recent industry safety standards and to make other changes to account for more than two decades of improvements and technological advancements. This rulemaking also responds to congressional mandates directing PHMSA to integrate risk-based regulatory approaches for certain LNG facilities.

    Comments due Jan 4, 2027Source checked
  • Comment period open ElectricEnergy Department, Federal Energy Regulatory Commission

    Authorizations for Certain Activities at Liquefied Natural Gas Plants

    The Federal Energy Regulatory Commission proposes to revise its regulations to establish procedures for authorizing activities at liquefied natural gas plants without case-specific authorization orders under sections 3 or 7 of the Natural Gas Act.

    Comments due Dec 21, 2026Source checked
  • Proposed WaterEnvironmental Protection Agency

    Public Water System Supervision Program Revision for the State of Arkansas

    Notice is hereby given that the State of Arkansas is revising its approved Public Water System Supervision (PWSS) program. Arkansas has adopted the Environmental Protection Agency (EPA) drinking water rules for the Consumer Confidence Report Rule Revisions. Therefore, the EPA intends to approve this PWSS program revision package.

    Published Sep 23, 2026Source checked
  • Proposed WastewaterEnvironmental Protection Agency

    Updates to the National Pollutant Discharge Elimination System Definitions and Exclusions

    The U.S. Environmental Protection Agency (EPA) proposes to revise a regulatory definition under the Clean Water Act (CWA) permitting regulations pertaining to discharges in the contiguous zone and ocean. The proposal would revise the regulatory definition of "discharge of a pollutant" to reflect and faithfully implement the statutory exclusion of vessels and other floating craft that add pollutants in the contiguous zone or the ocean from inclusion in the definition of "discharge of a pollutant" or "discharge", and thus, from National Pollutant Discharge Elimination System (NPDES) program requirements. The proposed rulemaking would also make conforming and clarifying changes to the NPDES regulatory exclusion for vessels and other floating craft. The effect of these changes would be that the addition of pollutants by a vessel or other floating craft in the contiguous zone or the ocean that is not secured to the seabed would not be a discharge and would not require CWA NPDES permit authorization to add pollutants to those waters.

    Published Sep 4, 2026Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM A53/A53M

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR parts 192 and 195 to incorporate by reference the updated industry standard ASTM A53/A53M, Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless (ASTM A53/A53M).

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM A333/A333M

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR parts 192 and 195 to incorporate by reference the updated industry standard ASTM A333/A333M, Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness (ASTM A333/A333M).

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM A372/A372M

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM A372/A372M, Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels (ASTM A372/ A372M).

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM F1055

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM F1055, Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM D2513

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM D2513, Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM F2767

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM F2767, Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM F2620

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM F2620, Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-NACE SP0206

    PHMSA is confirming the effective date for the DFR titled "Pipeline Safety: Standards Update--NACE SP0206," which published in the Federal Register on April 24, 2026. The DFR incorporates by reference into 49 CFR part 192 the updated edition of industry standard NACE SP0206, Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-NACE SP0502

    PHMSA is confirming the effective date for the DFR titled "Pipeline Safety: Standards Update--NACE SP0502," which published in the Federal Register on April 24, 2026. The DFR incorporates by reference into 49 CFR parts 192 and 195 the updated edition of industry standard NACE SP0502, Pipeline External Corrosion Direct Assessment Methodology.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-NFPA 59

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard NFPA 59, Utility LP-Gas Plant Code (NFPA 59).

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-NFPA 58

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard NFPA 58, Liquefied Petroleum Gas Code (NFPA 58).

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM F1973

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM F1973, Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM D2564

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM D2564, Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems.

    Effective Jan 1, 2027Source checked
  • Effective ElectricEnergy Department, Federal Energy Regulatory Commission

    Categorical Exclusion Under the National Environmental Policy Act for Certain Terminations or Revocations of Water Power Licenses or Exemptions

    The Federal Energy Regulatory Commission amends its regulations implementing the National Environmental Policy Act (NEPA) to expand an existing Categorical Exclusion (CE) to include "terminations or revocations of water power licenses and exemptions that will result in minor or no ground disturbing activity and minor or no changes in reservoir conditions and downstream flows."

    Effective Aug 24, 2026Source checked
  • Proposed Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Repair Criteria for Hazardous Liquid and Gas Transmission Pipelines

    PHMSA proposes to modernize and to clarify the anomaly response criteria in the Federal pipeline safety regulations for gas transmission and hazardous liquid pipelines. Driven by twenty years of technological development, modern engineering concepts allow operators to identify, schedule, and remediate pipeline anomalies more effectively and in a less costly manner. PHMSA proposes incorporating these improved safety practices into its regulations by finalizing certain safety improvements advanced in recent rulemakings for gas transmission pipelines and extending those changes to hazardous liquid pipelines. In addition, PHMSA proposes certain non-substantive revisions to its gas and hazardous liquid repair regulations to improve compliance.

    Published Jul 8, 2026Source checked
  • Proposed ElectricEnergy Department, Federal Energy Regulatory Commission

    Revisions to Financial Forms Reporting and Filing Requirements; Correction

    The Federal Energy Regulatory Commission published a document in the Federal Register of June 24, 2026, concerning a notice of proposed rulemaking seeking comment on the Commission's proposal to amend certain annual and quarterly financial forms, and its current regulations governing certain FERC financial forms. The document contained an error.

    Published Jul 7, 2026Source checked

Each search looks at up to 50 of the newest matching documents from each source we follow for a sector. Informational, not legal advice; confirm with your primacy agency or counsel.