Skip to content

Federal rule changes

Federal rules, proposed rules and notices for water, wastewater, electric and natural gas utilities, newest first, from the Federal Register.

Results

Showing 1–20 of 100

Source: Federal Register. Checked .

  • Comment period open Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Amendments to Liquefied Natural Gas Facilities

    PHMSA proposes updating its regulations for liquefied natural gas (LNG) facilities to incorporate by reference the most recent industry safety standards and to make other changes to account for more than two decades of improvements and technological advancements. This rulemaking also responds to congressional mandates directing PHMSA to integrate risk-based regulatory approaches for certain LNG facilities.

    Comments due Jan 4, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM A53/A53M

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR parts 192 and 195 to incorporate by reference the updated industry standard ASTM A53/A53M, Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless (ASTM A53/A53M).

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM A333/A333M

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR parts 192 and 195 to incorporate by reference the updated industry standard ASTM A333/A333M, Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness (ASTM A333/A333M).

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM A372/A372M

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM A372/A372M, Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels (ASTM A372/ A372M).

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM F1055

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM F1055, Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM D2513

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM D2513, Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM F2767

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM F2767, Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM F2620

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM F2620, Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-NACE SP0206

    PHMSA is confirming the effective date for the DFR titled "Pipeline Safety: Standards Update--NACE SP0206," which published in the Federal Register on April 24, 2026. The DFR incorporates by reference into 49 CFR part 192 the updated edition of industry standard NACE SP0206, Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-NACE SP0502

    PHMSA is confirming the effective date for the DFR titled "Pipeline Safety: Standards Update--NACE SP0502," which published in the Federal Register on April 24, 2026. The DFR incorporates by reference into 49 CFR parts 192 and 195 the updated edition of industry standard NACE SP0502, Pipeline External Corrosion Direct Assessment Methodology.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-NFPA 59

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard NFPA 59, Utility LP-Gas Plant Code (NFPA 59).

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-NFPA 58

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard NFPA 58, Liquefied Petroleum Gas Code (NFPA 58).

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM F1973

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM F1973, Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems.

    Effective Jan 1, 2027Source checked
  • Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Standards Update-ASTM D2564

    PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard ASTM D2564, Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems.

    Effective Jan 1, 2027Source checked
  • Proposed Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Repair Criteria for Hazardous Liquid and Gas Transmission Pipelines

    PHMSA proposes to modernize and to clarify the anomaly response criteria in the Federal pipeline safety regulations for gas transmission and hazardous liquid pipelines. Driven by twenty years of technological development, modern engineering concepts allow operators to identify, schedule, and remediate pipeline anomalies more effectively and in a less costly manner. PHMSA proposes incorporating these improved safety practices into its regulations by finalizing certain safety improvements advanced in recent rulemakings for gas transmission pipelines and extending those changes to hazardous liquid pipelines. In addition, PHMSA proposes certain non-substantive revisions to its gas and hazardous liquid repair regulations to improve compliance.

    Published Jul 8, 2026Source checked
  • Effective Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Class Location Change Requirements; Correction

    PHMSA is making a technical correction to a January 14, 2026 final rule that amended the class location change requirements. The final rule allows an operator to confirm or to restore the maximum allowable operating pressure (MAOP) of an eligible gas transmission pipeline segment that experiences a class location change by implementing an integrity management (IM) alternative. For MAOP restorations, PHMSA is clarifying in this correction notice that the 24-month deadline for implementing the initial programmatic requirements of the IM alternative runs from the effective date of the final rule or the date that an operator decides to initiate an MAOP restoration, whichever is later. This clarification is consistent with the requirements in the final rule, including the deadline in the IM alternative that applies to MAOP confirmations, which runs from the effective date of the final rule or the date of the class location change, whichever is later.

    Effective May 29, 2026Source checked
  • Proposed Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Adjustment to OPID Notifications for Construction; Correction

    This document corrects the preamble and amendatory regulatory text within a proposed rule published in the Federal Register of April 24, 2026 regarding monetary thresholds for certain gas pipeline facility construction notifications. This correction corrects monetary thresholds to match the intended values referenced elsewhere in the preamble.

    Published May 5, 2026Source checked
  • Proposed Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Eliminating Limitations on Welders and Welding Operators

    This NPRM proposes to remove the exclusion for welders or welding operators qualified by nondestructive testing from welding on compressor station pipe and components.

    Published Apr 24, 2026Source checked
  • Proposed Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Adjustment to OPID Notifications for Construction

    This NPRM proposes to increase the monetary threshold for Operator Identification Number notifications for certain construction and maintenance tasks on gas and hazardous liquid and carbon dioxide pipeline facilities. PHMSA is also proposing to adjust inflation adjustment procedures to provide a mechanism for updating these thresholds on an annual basis.

    Published Apr 24, 2026Source checked
  • Proposed Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration

    Pipeline Safety: Adjust Annual Report Deadlines

    This NPRM proposes to extend the annual report deadline for operators of gas distribution pipelines, gas transmission pipelines, regulated gas gathering pipelines, Type R gas gathering lines, underground natural gas storage facilities, and liquefied natural gas facilities. This NPRM also proposes to extend the National Pipeline Mapping System information submission deadline for operators of gas transmission and liquefied natural gas facilities. Annual reports for gas pipeline and gas pipeline storage facilities would be due on June 15, consistent with existing requirements for hazardous liquid pipelines.

    Published Apr 24, 2026Source checked

Each search looks at up to 50 of the newest matching documents from each source we follow for a sector. Informational, not legal advice; confirm with your primacy agency or counsel.