Notice is hereby given that the State of Arkansas is revising its approved Public Water System Supervision (PWSS) program. Arkansas has adopted the Environmental Protection Agency (EPA) drinking water rules for the Consumer Confidence Report Rule Revisions. Therefore, the EPA intends to approve this PWSS program revision package.
The U.S. Environmental Protection Agency (EPA or agency) is proposing the sixth Unregulated Contaminant Monitoring Rule (UCMR 6). Under the Safe Drinking Water Act (SDWA), the UCMR program gathers data about unregulated contaminant occurrence in drinking water. The proposed UCMR 6 would require public water systems (PWSs) to collect national occurrence data for seven ultrashort organofluorine compounds (including certain PFAS), three pesticide metabolites, 13 semivolatile organic compounds, and seven purgeable organic compounds. Subject to the availability of appropriations, the EPA will require all community and non-transient non-community water systems (CWSs and NTNCWSs) serving 3,300 or more people, and a representative sample of PWSs serving fewer than 3,300 people, to conduct monitoring. These contaminants are not currently subject to national primary drinking water regulations (NPDWRs), and the EPA is proposing to require the collection of drinking water occurrence data to inform agency decisions. The data collected will be publicly available. The EPA is also announcing two public meetings (via webinar) to discuss this proposal of the sixth Unregulated Contaminant Monitoring Rule (UCMR 6).
In this proposed rulemaking, the U.S. Environmental Protection Agency (EPA) proposes a federal exemption, pursuant to Safe Drinking Water Act (SDWA) 1416(f) and 1450(a)(1), that will extend the dates of compliance with the Maximum Contaminant Levels (MCLs) for perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) from April 26, 2029, to April 26, 2031, for those systems that submit a request. The Agency requests comment on this proposal, including the mechanisms through which the MCL compliance deadlines for PFOA and PFOS can be exempted, and has identified specific areas where public input will be helpful for the EPA in developing the final rule. In addition to seeking written input, the EPA will be holding a public hearing on July 7, 2026.
The Environmental Protection Agency (EPA) is proposing to rescind its regulatory determinations to regulate four per- and polyfluoroalkyl substances (PFAS)--perfluorohexane sulfonic acid (PFHxS), perfluorononanoic acid (PFNA), hexafluoropropylene oxide dimer acid and its ammonium salt (HFPO-DA, commonly known as GenX chemicals), and mixtures of these three PFAS plus perfluorobutane sulfonic acid (PFBS)--under the Safe Drinking Water Act (SDWA). The EPA is also proposing to rescind all associated regulatory provisions currently codified in the EPA's 2024 PFAS National Primary Drinking Water Regulations (NPDWR) exclusive to these PFAS that were promulgated pursuant to the regulatory determinations that the EPA is now proposing to rescind, including the final Maximum Contaminant Levels (MCLs) that would have required monitoring, and where necessary, treatment by public water systems (PWSs). This proposed action is necessary to correct the unlawful procedure under which these regulations were promulgated. Under the EPA's prior interpretation, the EPA proposed and finalized regulatory determinations and regulations for these PFAS simultaneously and in tandem. Under the best reading of the statute, the EPA is not authorized to take such actions simultaneously and therefore, the Agency proposes to rescind those regulatory determinations, Maximum Contaminant Level Goals (MCLGs) and associated portions of the 2024 PFAS NPDWR. The EPA is seeking public comment on this proposal.
The U.S. Environmental Protection Agency (EPA) is publishing a draft list of contaminants that are currently not subject to any proposed or promulgated national primary drinking water regulations for public review and comment. These contaminants are known or anticipated to occur in public water systems and may require regulation under the Safe Drinking Water Act (SDWA) in the future. The draft list provided in this document is the sixth Contaminant Candidate List (CCL) published by the Agency since the SDWA amendments of 1996. The draft Sixth Contaminant Candidate List (CCL 6 or the list) includes 75 chemicals, 4 chemical groups (disinfection byproducts (DBPs), microplastics, per- and polyfluoroalkyl substances (PFAS), and pharmaceuticals) and 9 microbes. The EPA seeks public comment on the draft CCL 6 and the process used to develop the draft CCL 6. The EPA will consider all information and comments received in response to this notice of availability for determining the final CCL 6.
The U.S. Environmental Protection Agency (EPA) is announcing final regulatory determinations for nine contaminants listed on the fifth Contaminant Candidate List. Specifically, the Agency is making final determinations not to regulate 2-aminotoluene, cylindrospermopsin, ethoprop, microcystins, molybdenum, permethrin, profenofos, tebuconazole, and tribufos. The Safe Drinking Water Act (SDWA) requires the EPA to make regulatory determinations every five years on at least five unregulated contaminants. A regulatory determination is a decision about whether or not to begin the process to propose and promulgate- a national primary drinking water regulation (NPDWR) for an unregulated contaminant.
The U.S. Environmental Protection Agency ("EPA" or the "Agency") is proposing a National Primary Drinking Water Regulation (NPDWR) for perchlorate and a health-based Maximum Contaminant Level Goal (MCLG) under the Safe Drinking Water Act (SDWA). In this action, the EPA is proposing to set the perchlorate MCLG at 0.02 mg/L (20 [micro]g/L). The EPA is also proposing and taking comment on setting an enforceable Maximum Contaminant Level (MCL) for perchlorate at 0.02 mg/ L (20 [micro]g/L), 0.04 mg/L (40 [micro]g/L), or 0.08 mg/L (80 [micro]g/L). The EPA is also proposing requirements for water systems to conduct monitoring for perchlorate in drinking water, take mitigation actions if the level exceeds the MCL, provide information about perchlorate to their consumers through public notification and consumer confidence reports, and report to their respective primacy agency. The Administrator has determined that the benefits of this regulation would not justify the costs; however, the EPA is required to issue an NPDWR and MCLG for perchlorate in response to the D.C. Circuit's decision in NRDC v. Regan.
This action announces the Environmental Protection Agency's (EPA's) approval of alternative testing methods for use in measuring the levels of contaminants in drinking water to determine compliance with national primary drinking water regulations. The Safe Drinking Water Act authorizes EPA to approve the use of alternative testing methods through publication in the Federal Register. EPA is using this streamlined authority to make two additional methods available for analyzing drinking water samples. This expedited approach provides public water systems, laboratories, and primacy agencies with more timely access to new measurement techniques and greater flexibility in the selection of analytical methods, thereby reducing monitoring costs while maintaining public health protection.
In December 2023, the U.S. Environmental Protection Agency (EPA) requested comment on the proposed the Lead and Copper Rule Improvements (LCRI), which informed the revisions to the National Primary Drinking Water Regulation (NPDWR) for lead and copper. After consideration of public comment on the LCRI, and consistent with the provisions set forth under the Safe Drinking Water Act (SDWA), the EPA is finalizing revisions to the NPDWR for lead and copper. In this rule, the agency is finalizing requirements for drinking water systems to replace lead and certain galvanized service lines. The final rule also removes the lead trigger level, reduces the lead action level to 0.010 mg/L, and strengthens tap sampling procedures to improve public health protection and simplify implementation relative to the 2021 Lead and Copper Rule Revisions (LCRR). Further, this final rule strengthens corrosion control treatment, public education and consumer awareness, requirements for small systems, and sampling in schools and child care facilities. The final rule will significantly reduce the adverse human health impacts of exposure to toxic lead in drinking water.
The Safe Drinking Water Act (SDWA) requires the U.S. Environmental Protection Agency (EPA or the agency) to conduct a review every six years of existing national primary drinking water regulations (NPDWRs) and determine which, if any, are appropriate for revision. The purpose of the review, called the Six-Year Review, is to evaluate available information for regulated contaminants to determine if any new information on health effects, treatment technologies, analytical methods, occurrence, exposure, implementation, and/or other factors provides a basis to support a regulatory revision that would improve or strengthen public health protection. While EPA has recently completed several significant revisions to existing regulations and other regulatory revisions are currently underway, based on this periodic review of all NPDWRs, there are no additional candidates for regulatory revision at this time.
The U.S. Environmental Protection Agency (EPA) is correcting formatting and entry designations in a final rule that was published in the Federal Register on April 26, 2024. The rule finalized National Primary Drinking Water Regulations under the Safe Drinking Water Act for five individual per- and polyfluoroalkyl substances (PFAS): perfluorooctanoic acid (PFOA), perfluorooctane sulfonic acid (PFOS), perfluorohexane sulfonic acid (PFHxS), perfluorononanoic acid (PFNA), hexafluoropropylene oxide dimer acid (HFPO-DA, commonly known as GenX Chemicals). The rule finalized a NPDWR for two or more mixtures of PFNA, PFHXs, HFPO-DA and perfluorobutane sulfonic acid (PFBS). This document corrects formatting and entry designations in the final regulation.
The U.S. Environmental Protection Agency (EPA or the agency) is proposing a regulatory framework for states and public water systems (PWSs) to identify and assess restructuring alternatives to ensure that every community receives safe, affordable, and reliable drinking water. The proposed regulations would: establish a new mandatory restructuring assessment authority for states; require states with primary enforcement authority (primacy) to develop mandatory restructuring assessment programs and submit primacy revisions for EPA review and approval; establish requirements for states and PWSs that implement system-specific mandatory restructuring assessments; and establish eligibility requirements and limitations for restructuring incentives under state-approved restructuring plans. This proposed rulemaking is required under amendments to the Safe Drinking Water Act (SDWA). By taking this action, the EPA intends to strengthen the ongoing efforts of states and PWSs to protect public health.
The U.S. Environmental Protection Agency (EPA) is revising the Consumer Confidence Report (CCR) Rule in accordance with America's Water Infrastructure Act (AWIA) of 2018 (United States, 2018) and is requiring States, territories, and Tribes with primary enforcement responsibility to report compliance monitoring data (CMD) to the EPA. The revisions will improve the readability, clarity, and understandability of CCRs as well as the accuracy of the information presented, improve risk communication in CCRs, incorporate electronic delivery options, provide supplemental information regarding lead levels and control efforts, and require systems who serve 10,000 or more persons to provide CCRs to customers biannually (twice per year). The final rule requirements for States to submit to the EPA CMD for all National Primary Drinking Water Regulations (NPDWRs) will improve the EPA's ability to fulfill oversight responsibilities under the Safe Drinking Water Act (SDWA).
In March 2023, the U.S. Environmental Protection Agency (EPA) proposed and requested comment on the National Primary Drinking Water Regulation (NPDWR) and health-based Maximum Contaminant Level Goals (MCLGs) for six per- and polyfluoroalkyl substances (PFAS): perfluorooctanoic acid (PFOA), perfluorooctane sulfonic acid (PFOS), perfluorohexane sulfonic acid (PFHxS), perfluorononanoic acid (PFNA), hexafluoropropylene oxide dimer acid (HFPO-DA, commonly known as GenX Chemicals), and perfluorobutane sulfonic acid (PFBS). After consideration of public comment and consistent with the provisions set forth under the Safe Drinking Water Act (SDWA), the EPA is finalizing NPDWRs for these six PFAS. Through this action, the EPA is finalizing MCLGs for PFOA and PFOS at zero. Considering feasibility, the EPA is promulgating individual Maximum Contaminant Levels (MCLs) for PFOA and PFOS at 4.0 nanograms per liter (ng/L) or parts per trillion (ppt). The EPA is also finalizing individual MCLGs and is promulgating individual MCLs for PFHxS, PFNA, and HFPO-DA at 10 ng/L. In addition to the individual MCLs for PFHxS, PFNA, and HFPO-DA, in consideration of the known toxic effects, dose additive health concerns and occurrence and likely co-occurrence in drinking water of these three PFAS, as well as PFBS, the EPA is finalizing a Hazard Index (HI) of 1 (unitless) as the MCLG and MCL for any mixture containing two or more of PFHxS, PFNA, HFPO-DA, and PFBS. Once fully implemented, the EPA estimates that the rule will prevent thousands of deaths and reduce tens of thousands of serious PFAS-attributable illnesses.
The U.S. Environmental Protection Agency (EPA) is requesting public input on drinking water analytical methods for emerging contaminants in drinking water, particularly those listed on the agency's Fifth Contaminant Candidate List (CCL 5), that might support monitoring under the Unregulated Contaminant Monitoring Rule. This notice describes published drinking water analytical methods and EPA drinking water methods currently in development for the CCL and other emerging contaminants, with an expectation that some of these methods will support the sixth Unregulated Contaminant Monitoring Rule (UCMR 6) and/or other future cycles of the UCMR program. The agency is also announcing a virtual public meeting (via webinar) to discuss potential approaches to developing UCMR 6. The webinar will discuss the following: drinking water analytical methods and contaminants being considered, UCMR 6 sampling design, laboratory approval, and other potential aspects of the monitoring approach. The agenda will include time for brief remarks by participants who pre- register.
This action announces the Environmental Protection Agency's (EPA's) approval of alternative testing methods for use in measuring the levels of contaminants in drinking water to determine compliance with national primary drinking water regulations. The Safe Drinking Water Act authorizes EPA to approve the use of alternative testing methods through publication in the Federal Register. EPA is using this streamlined authority to make 93 additional methods available for analyzing drinking water samples. This expedited approach provides public water systems, laboratories, and primacy agencies with more timely access to new measurement techniques and greater flexibility in the selection of analytical methods, thereby reducing monitoring costs while maintaining public health protection.
The U.S. Environmental Protection Agency (EPA) is proposing revisions to the National Primary Drinking Water Regulation (NPDWR) for lead and copper under the authority of the Safe Drinking Water Act (SDWA). In this document, EPA is proposing to require water systems to replace lead service lines, remove the lead trigger level, reduce the lead action level to 0.010 mg/L, and strengthen tap sampling procedures, among other changes that would improve public health protection and simplify the rule relative to the 2021 Lead and Copper Rule Revisions (LCRR). This proposed rule provides improvements in the additional following areas: corrosion control treatment, public education and consumer awareness, requirements for small systems, and sampling in schools and child care facilities. EPA's proposed rule aims to address potential disproportionate impacts of lead in drinking water in communities, including through proposed lead service line replacement and public education, among other areas of the proposed rule.
The Environmental Protection Agency (EPA) is proposing to revise the Consumer Confidence Report (CCR) Rule in accordance with America's Water Infrastructure Act (AWIA) of 2018 (AWIA, 2018) and to require reporting of compliance monitoring data to EPA. The proposed revisions to improve the CCR would improve the readability, clarity, and understandability of CCRs as well as the accuracy of the information presented, improve risk communication in CCRs, incorporate electronic delivery options, provide supplemental information regarding lead levels and control efforts, and require systems who serve 10,000 or more persons to provide CCRs to customers biannually (twice per year). The proposed requirements for states to submit to EPA compliance monitoring data for all National Primary Drinking Water Regulations (NPDWRs) submitted by systems to the State would enhance EPA's oversight capabilities.
The Environmental Protection Agency (EPA) is committed to using and advancing the best available science to tackle per- and polyfluoroalkyl substances (PFAS) pollution, protect public health, and harmonize policies that strengthen public health protections with infrastructure funding to help communities, especially disadvantaged communities, deliver safe drinking water. In March 2021, EPA issued a final regulatory determination to regulate perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) as contaminants under Safe Drinking Water Act (SDWA). In this notice, EPA is issuing a preliminary regulatory determination to regulate perfluorohexane sulfonic acid (PFHxS), hexafluoropropylene oxide dimer acid (HFPO-DA) and its ammonium salt (also known as a GenX chemicals), perfluorononanoic acid (PFNA), and perfluorobutane sulfonic acid (PFBS), and mixtures of these PFAS as contaminants under SDWA. Through this action, EPA is also proposing a National Primary Drinking Water Regulation (NPDWR) and health-based Maximum Contaminant Level Goals (MCLG) for these four PFAS and their mixtures as well as for PFOA and PFOS. EPA is proposing to set the health-based value, the MCLG, for PFOA and PFOS at zero. Considering feasibility, including currently available analytical methods to measure and treat these chemicals in drinking water, EPA is proposing individual MCLs of 4.0 nanograms per liter (ng/L) or parts per trillion (ppt) for PFOA and PFOS. EPA is proposing to use a Hazard Index (HI) approach to protecting public health from mixtures of PFHxS, HFPO-DA and its ammonium salt, PFNA, and PFBS because of their known and additive toxic effects and occurrence and likely co-occurrence in drinking water. EPA is proposing an HI of 1.0 as the MCLGs for these four PFAS and any mixture containing one or more of them because it represents a level at which no known or anticipated adverse effects on the health of persons is expected to occur and which allows for an adequate margin of safety. EPA has determined it is also feasible to set the MCLs for these four PFAS and for a mixture containing one or more of PFHxS, HFPO-DA and its ammonium salt, PFNA, PFBS as an HI of unitless 1.0. The Agency is requesting comment on this action, including this proposed NPDWR and MCLGs, and have identified specific areas where public input will be helpful for EPA in developing the final rule. In addition to seeking written input, the EPA will be holding a public hearing on May 4, 2023.
Published Mar 29, 2023Source checked
Each search looks at up to 50 of the newest matching documents from each source we follow for a sector. Informational, not legal advice; confirm with your primacy agency or counsel.