PHMSA is proposing to remove an unnecessary provision from the maximum allowable operating pressure requirements for testing pipe materials cut out from test manifold sites on gas transmission lines.
Published Apr 24, 2026Source checked
Effective Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration
This final rule makes editorial corrections to telephone and facsimile numbers listed within the Federal Pipeline Safety Regulations by removing obsolete information.
Effective Aug 3, 2026Source checked
Effective Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration
This final rule makes certain editorial corrections and non- substantive changes to the criteria for conducting integrity assessments using guided wave ultrasonic testing.
Effective Aug 3, 2026Source checked
Effective Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration
This DFR amends PHMSA's regulations to incorporate by reference an updated edition of industry standard NACE SP0206, Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas (DG-ICDA). This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.
Effective Jan 1, 2027Source checked
Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration
This DFR amends PHMSA's regulations to incorporate by reference an updated edition of industry standard NACE SP0502, Pipeline External Corrosion Direct Assessment Methodology. This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.
Effective Jan 1, 2027Source checked
Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration
This DFR amends PHMSA's regulations to incorporate by reference an updated edition of industry standard ASTM F1055, Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing. This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.
Effective Jan 1, 2027Source checked
Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration
This DFR amends PHMSA's regulations to incorporate by reference an updated edition of industry standard ASTM F1973, Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems. This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.
Effective Jan 1, 2027Source checked
Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration
This DFR amends PHMSA's regulations to incorporate by reference an updated edition of industry standard ASTM F2767, Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution. This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.
Effective Jan 1, 2027Source checked
Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration
This DFR amends PHMSA's regulations to incorporate by reference an updated edition of industry standard ASTM D2513, Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings. This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.
Effective Jan 1, 2027Source checked
Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration
This DFR amends PHMSA's regulations to incorporate by reference an updated edition of industry standard ASTM F2620, Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings. This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.
Effective Jan 1, 2027Source checked
Final, effective Jan 1, 2027 Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration
This DFR amends PHMSA's regulations to incorporate by reference an updated edition of industry standard ASTM A333/A333M, Standard Specification for Seamless and Welded Steel Pipe for Low- Temperature Service and Other Applications with Required Notch Toughness. This updated standard will maintain or improve public safety, prevent regulatory confusion, reduce compliance burdens on stakeholders, and satisfy a mandate in the National Technology Transfer and Advancement Act (NTTAA) of 1995.
Effective Jan 1, 2027Source checked
Effective ElectricEnergy Department, Federal Energy Regulatory Commission
In accordance with the Commission's regulations, the Commission, by its designee, the Executive Director, issues this annual update to the fee schedule in the appendix to the part, which lists per-acre rental fees by county (or other geographic area) for use of government lands by hydropower licensees.
The U.S. Environmental Protection Agency (EPA) is publishing a draft list of contaminants that are currently not subject to any proposed or promulgated national primary drinking water regulations for public review and comment. These contaminants are known or anticipated to occur in public water systems and may require regulation under the Safe Drinking Water Act (SDWA) in the future. The draft list provided in this document is the sixth Contaminant Candidate List (CCL) published by the Agency since the SDWA amendments of 1996. The draft Sixth Contaminant Candidate List (CCL 6 or the list) includes 75 chemicals, 4 chemical groups (disinfection byproducts (DBPs), microplastics, per- and polyfluoroalkyl substances (PFAS), and pharmaceuticals) and 9 microbes. The EPA seeks public comment on the draft CCL 6 and the process used to develop the draft CCL 6. The EPA will consider all information and comments received in response to this notice of availability for determining the final CCL 6.
Published Apr 6, 2026Source checked
Effective Natural gasTransportation Department, Pipeline and Hazardous Materials Safety Administration
The Federal Energy Regulatory Commission (Commission) approves 11 modified Critical Infrastructure Protection (CIP) Reliability Standards. The Commission also approves four new definitions and 18 modified definitions in the North American Electric Reliability Corporation (NERC) Glossary of Terms Used in Reliability Standards. To address concerns regarding a proposed self-implementing exception phrase ("per system capability") that appears in multiple provisions of the modified CIP Reliability Standards, the Commission directs NERC to develop a clear set of criteria that satisfies the fundamental needs for oversight, consistency, and alternative mitigation when a responsible entity invokes the per system capability exception. NERC, the Commission-certified Electric Reliability Organization (ERO), submitted the proposed modifications to update the CIP Reliability Standards to enable the application of virtualization and other new technologies in a secure manner.
Effective May 26, 2026Source checked
Effective ElectricEnergy Department, Federal Energy Regulatory Commission
The Federal Energy Regulatory Commission (Commission) approves the proposed Critical Infrastructure Protection (CIP) Reliability Standard CIP-003-11 (Cyber Security--Security Management Controls). The North American Electric Reliability Corporation (NERC), the Commission- certified Electric Reliability Organization (ERO), submitted the proposed Reliability Standard to mitigate risks posed by a coordinated cyberattack on low-impact facilities, the aggregate impact of which could be much greater.
Effective May 26, 2026Source checked
Effective ElectricEnergy Department, Federal Energy Regulatory Commission
The Federal Energy Regulatory Commission adopts eXtensible Business Reporting Language-Comma-Separated Values as the standard for filing the Electric Quarterly Report (EQR). In addition, the Commission amends its regulations to require Regional Transmission Organizations and Independent System Operators to produce reports containing market participant transaction data. The Commission also modifies and clarifies EQR reporting requirements. These changes are designed to update the data collection, improve data quality, increase market transparency, decrease the costs, over time, of preparing the necessary data for submission, and streamline compliance with any future changes to the filing requirements.
Effective May 26, 2026Source checked
Each search looks at up to 50 of the newest matching documents from each source we follow for a sector. Informational, not legal advice; confirm with your primacy agency or counsel.